Padcrete

The easy way to level concrete pads.

“This is the normal now and it works great! Cuts time like crazy!”

“It’s ROCK SOLID. I’ve used Polecrete foam on HUNDREDS of poles over the years!”

“Minimum Effort. Maximum Results! 🤜🤛”

Shifting or sinking concrete pads present challenges for utilities and HVAC systems. Padcrete™ provides a simpler solution. This expanding, rigid urethane foam system allows for quick and economical repairs, restoring stability to pad-mounted equipment. Padcrete™ ensures equipment remains level and serviceable.

15

Foam expands to 15X its original volume.

1,000,000

Production capacity of 1MM kits per year.

15

Foam sets in 15 min. Climb the pole under 30 min.

Quick-Fix to level out uneven concrete pad

How to set fence posts and poles with Polecrete Stabilizer expanding foam.

Mix. Pour. Set.

Padcrete™ comes in a small, easy-to-carry kit and levels pads using a simple, seven-step process:

Secure an alligator jack underneath the pad. If needed, dig a slot underneath the pad to properly place the jack.
Jack up the pad until it is level.
Fill dirt in and around the uneven jaws and levels of the jack. This ensures that Padcrete™ foam will not seep out and surround the jack.
Use the butt end of a standard hammer to make access holes on either side of the elevated end of the pad.
Mix Padcrete™ by pouring the contents of the bottle marked “A” into the jug marked “B”. Shake vigorously with the cap end of the jug pointed away from you. Always wear chemical-resistant gloves (included) while mixing Padcrete™, as well as protective eyewear.
Pour the Padcrete™ mixture into the access holes, which should then be plugged with dirt.
Wait 15 minutes for Padcrete™ to expand and become rigid. Afterward, remove the jack.